Shopping Cart
0 items
 
Bestsellers
 

DJI Ronin-MX 3-Axis Gimbal Stabilizer

DJI Ronin-MX 3-Axis Gimbal Stabilizer
Click to enlarge

Price: $1,140.00
Availability: In Stock
Model: Ronin-MX 3-Axis
Average Rating: Not Rated
Performance
Load Weight (Reference Value) 10 lb / 4.5 kg
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 200°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°
Tilt Axis Control: +270° to -150°
Roll Axis Control: ± 110°
Controlled Rotation Range Pan Axis Control: 360°
Tilt Axis Control: +45° to -135°
Roll Axis Control: ± 25°
Electrical and Mechanical
Sensors Temperature sensor
Processing 32-Bit DSP Processor
Expandability D-Bus receiver supported
Working Current Static Current: 300 mA (at 16 V)
Dynamic Current: 600 mA (at 16 V)
Locked Motor Current: Up to 10 A (at 16 V)
Receiver
Frequency 2.4 GHz
Transmitter
Frequency 2.4 GHz
Connectivity
Wireless Bluetooth 4.0
Wired 1 x USB 2.0
GCU
Power Requirements 4S Ronin-M battery
System Requirements
Assistant Software Windows XP or above
Mac OS X 10.9 or above
iOS 7.1 or above
Android 4.3 or above
General
Control Modes Underslung Mode
Upright Mode
Briefcase Mode
Aerial Mode
Jib or Wirecam Mode
Accessory Power Ports 2 x 12 V Regulated P-Tap
1 x USB 500 mW
1 x DJI Lightbridge
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 4.7" / 120 mm
Maximum height measured from top of camera base plate: 7.7" / 195 mm
Maximum width: 6.3" / 160 mm
Operating Temperature 5 to 120°F / -15 to 50°C
Dimensions (W x D x H) Excluding Handle Bar: 11 x 14.6 x 13.4" / 280 x 370 x 340 mm
Including Handle Bar: 22 x 14.6 x 17.3" / 560 x 370 x 440 mm
Weight Including Handle Bar: 6.11 lb / 2.77 kg
Including Vibration Damper: 4.74 lb / 2.15 kg
Packaging Info
Package Weight 20.0 lb
Box Dimensions (LxWxH) 18.583 x 17.244 x 11.575"

 


In the Box
DJI Ronin-MX 3-Axis Gimbal Stabilizer
Handle Bar
2.4 GHz Remote Control
Tuning Stand
2 x Intelligent Battery
Charger
Cable Pack
Micro-USB Cable
Camera Mounting Plate
Upper Mounting Plate
Vibration Absorber
2 x Camera Screw A (1/4"-20)
2 x Camera Screw B (3/8")
2 x Camera Screw C (1/4"-20)
2 x Camera Screw D (3/8")
Lens Support
4 x Allen Wrench
FAQ PDF 73kb

There are no additional images for this product.